1computer lights X Y axis in the centre console adjustments: first click on X ( Tilt ) Y ( Pan ) - - - - - - - - with strobe lights ( patch ) - F ---- A. ( X ( Tilt ) Y ( Pan ) )
In 2 control table view address code: VIEW----D. VTEW----9----ENTER confirmation.
3yards: strobe lights - F----E - Digital - confirm. V: Digital ---- A
AVOuTEs ( love Futura logo ) + B below three lights
4 remove the lamp: matching ( patch ), delete (CLEAR ) - A - confirmation ( ENTER ).
5disk: DisK----B - confirmation ( ENTER ).
Disc read: DisK----A ---- confirmation ( ENTER ).
6: A----FF console empty. Delete program: A----F----D----G.
Remove material: A----F----O----G.
7: delete delete program ( CLEAR ) - click on the2 procedure ( blue) keys.
8disk format: Disk----D----B ---- confirmation ( ENTER ).
9lights: single dual - channel strobe lights ( CHANNEL ) - C----Even, odd single.
10material: point light, light material ---- material memory ( store palette ) - Grey keys.
11disk read SG files: utilites----Load shapeFile ( ENTER ) - confirm. Or with a MT.
12adjusting wheel speed: Shift + 2.
13two program rapid repeated use: with NormaL mode, the first program is pushed on, and then click on the second procedures of blue key, can be repeated a bit loose.
The 14material expansion: scale lamp - material memory (store palette ) - Digital - confirmation (ENTER). Proposed: Digital ---- B.
15to the program editing time: C key - point program.
16select built-in program: point light ---- G----A----120procedures. C D key range in size and speed, to withdraw from the E key.
17 acquired the lights go regulation procedure: first draw step speed regulation, to be adjusted after the click 2 times A button.
18 electronic lighting: menu ( HmL menu ) - G----1.ON,2.RESET self-checking,3.OFF.
19 replacing the centre console version: A----A----68340 password confirm key ---- ---- B ( ENTER ). After confirmation by 1- ( ENTER ), last exit program.
20in the day after tomorrow go inside the lamp increase program: expansion (unfold ) -- Proceedings - selected lights lamp adjustment, the original lamp chosen point A key - point Lan Jian increases -- after all.
The 21revised lights go procedures: expansion (unfold ) - program - see the first few steps wrong push rod pull down -- strobe lights modified ---- A - little blue button.
22 combined channel: matching (patch ) ---- ---- ---- lights lamps line the mouth ( blue keys).
Matching ( patch ) - - - - - - - - - - - - - on line silicon blue key.
The 23replacement of the built-in lamp base : first the key s to the left -- insert disk - G----D ---- confirmation ( ENTER ).
